Milwaukee 0721-21 V28 28-Volt Lithium-Ion 1/2-Inch Cordless Right Angle Drill/Driver Kit

  • Product Rating

(Reviewed by 4 customers)
Milwaukee 0721-21 V28 28-Volt Lithium-Ion  1/2-Inch Cordless Right Angle Drill/Driver Kit

Milwaukee 0721-21 description

High-horsepower motor delivers 1,081 in.-lbs. of maximum torque. Designed for drilling 2-9/16" holes with a selfeed bit in 2 times material. 90-degree head rotates 360-degrees for easy access. Easy-reach reversing switch and speed control gives user simpler operation to match the bit speed to the job. STANDARD EQUIPMENT: 1/2" Right angle drill, 28 Volt lithium-Ion battery No.48-11-2830, 1/2" chuck key, impact resistant carrying case. SPECIFICATIONS: 28 Volt, 0-400/0-1,000 no load RPM, 1,081 in.-lbs torque. 18.5" tool length. 10.94 lbs. tool weight.  

Milwaukee 0721-21 specifications

Right-Angle Drills
Light weight - 28V power with 18V weight
2-9/16" Capacity - Drilling 2x material with a selfeed bit
Heavy Duty Gear Box, 0-400/0-1000 Rpm; 1081 in.-lbs max torque
Head and handle swivel 360 deg - can be locked tight in any position
20 pounds
Package Height
5.9 inches
Package Width
14.8 inches
Package Length
20.4 inches
Package Weight
19.2 pounds

Milwaukee 0721-21 reviews

great product
helpful for 6 of 6 people
I have been using this item for about a week now and it is impressive! With almost 1100 in/lbs of torque this drill eats through 2x studs like you would not believe! This item really lives up to the claim of corded performance without the cords. The batteries last longer than any NiCd on the market. I would have like it to have a keyless chuck as the keyed chucks are a little less convenient. A rep for milwaukee said they tried the keyless chucks but the bit would slip so I guess they did the right thing in making the keyed chuck. It can also be inconvenient to adjust the drill although it can be rotated a full 360 degrees which is a great feature. Otherwise a must have for plumbers and electricians!
Power for winch on sailboat
helpful for 3 of 6 people
It is not a total substitute for a permanent power winch on a 43' sailboat. Easy operation for the initial grinding on the main halyard or a jib sheet but will fault out (stop) when it gets close to the end (last 4-6 feet). Easy to handle as long as the winch is self-tailing.
nice product
The product is extremely heavy duty and works for everything you'll need a right angle drill for. I have a 28v hammer drill and a 28v impact wrench as well and they all perform exactly as described from the manufacturer. For the price, the 28v units are pretty pricy. The fact that they are so expensive and there is only 1 battery is the only reason I gave it 4 stars. If this review was based on the quality alone, it definelty gets a 5.
I'm an electrician working in the bay area and this tool is new to our truck. We just finished our first big job using it exclusively. The convenience of this tool is amazing. It works steady and compared to our super hog it works slow but by the time the super hog is set up this drill has made the hole and is back in the box. I really wish milwaukee could figure out a way to adjust the angle of the neck without the use of wrenches but this is their standby right angle drill design and I guess they are sticking with it. Battery life is good and we use three V 28 tools now so lots of batteries kicking around makes everything convenient. We will buy more of these in the future.
Usually ships in 24 hours

See other power tools that customers buy with Milwaukee 0721-21 V28 28-Volt Lithium-Ion 1/2-Inch Cordless Right Angle Drill/Driver Kit